高功率、高效率、全固态准连续钛宝石激光器  

High Power, High Efficiency, All-Solid-State Quasi-Continuous-Wave Ti: Sapphire Laser System

作　　者：邹雷[1] 丁欣[1] 魏权夫[1] 于意仲[1] 温午麒[1] 张百钢[1] 徐德刚[1] 陆颖[1] 王鹏[1] 姚建铨[1] 

机构地区：[1]天津大学精仪学院激光与光电子研究所

出　　处：《中国激光》2004年第12期1409-1412,共4页Chinese Journal of Lasers

基　　金：国家自然科学基金(60278001)教育部天津大学;南开大学科技合作项目资助课题。

摘　　要：以激光二极管阵列抽运Nd:YAG内腔倍频激光器作为抽运源,实现了全固态准连续钛宝石激光器的高功率、高效率运转。当532nm的抽运光为24W时,得到了4.7W输出功率及19.6％的高转换效率。为了获得钛宝石激光器理想的宽带输出,分别使用了两组膜片。第一组是750-850nm,第二组是850-950nm,每组膜片都有三种透过率,分别为5％,10％,15％。由于钛宝石荧光谱线的中心波长在795nm附近,使用第一组膜片在透过率为10％的情况下获得了最大4.7W的输出功率。使用第二组膜片也获得了3W左右的输出功率,为将要进行的宽带调谐提供了必要的前提。Using frequency-doubled Nd : YAG laser pumped by laser-diode-array as pump source, a high output power, high conversion efficiency, all-solid-state, quasi-continuous-wave Ti:sapphire laser system is achieved. The maximum of the Ti:sapphire laser output power of 4. 7 W and the conversion efficiency of 19. 6% are obtained at 532-nm pump powr of 24 W. To ensure the ideal broadband output of Ti:sapphire laser, two sets of Ti:sapphire resonator mirrors were used, respectively. One is from 750 to 850 nm, the other is from 850 to 950 nm. And the transmissivity is 5%, 10%, 15% respectively for two sets. Because the centric wavelength of the resonator laser is nearly 795 nm, the maximum of the Ti:sapphire laser output power is 4. 7 W with the first set of mirror and the transmissivity of the output mirror is 10%. The second set of mirror can generate the output power of 3 W, which is high enough to achieve broadband tuning for the future.

关 键 词：激光技术 钛宝石激光器 全固态 准连续 高功率 高效率 

分 类 号：TN248.1[电子电信—物理电子学]