PC/PA1010共混物的流变性能  

The Rheological Properties of PC/PA 1010 Blend

作　　者：李新法[1] 沈百栓[1] 杨进元[1] 罗建卿 

机构地区：[1]郑州大学化学系,450052

出　　处：《塑料工业》1993年第2期42-45,共4页China Plastics Industry

摘　　要：本文用XLY-Ⅱ型毛细管流变仪研究了PC/PA1010共混物的流变特性,讨论了剪切速率、温度和配比对共混物表观粘度的影响。结果表明:当温度升高和PA1010含量增大时,共混物表观粘度明显降低,剪切速率对共混物表观粘度的影响较小。The rheological properties of PC/PA1010 blend were studiend by XLY—2 capillary rheometer. The effects of shear rate, temperature and compounding ratio on the apparent viscosity of the blend were discussed. The results showed that the apparent viscosity decreased obviously. When the temperature raised and PA1010 content increased ;the shear rate had little effect on the apparent viscosity.

关 键 词：聚碳酸酯 尼龙1010 共混物 流变性 

分 类 号：TQ323.6[化学工程—合成树脂塑料工业]