织机减振器的动态设计与仿真  

Dynamic design and simulation on vibration isolator of loom

作　　者：王益轩[1] 宿月文[1] 万宏强[1] 李金华[1] 连力平 武友勤[3] 

机构地区：[1]西安工程科技学院机电工程学院,陕西西安710048 [2]陕西黄河工模具有限公司,陕西西安710043 [3]西安工程科技学院产业集团,陕西西安710048

出　　处：《纺织高校基础科学学报》2004年第4期375-379,共5页Basic Sciences Journal of Textile Universities

基　　金：陕西省科技攻关项目 ( 2 0 0 0 K1 2 - J1 0 )

摘　　要：针对传统的螺旋弹簧减振器阻尼小、易损伤等问题 ,参照发达国家新型高阻尼减振器的特点 ,分别设计了用于织机的四地脚及三轴的高阻尼橡胶和金属螺旋弹簧组合减振器 .给出了该减振器的结构设计要点及设计参数 .在 ANSYS及 ADAMS平台上实现了减振器的动态仿真 ,对其结构刚度与阻尼参数进行了优化设计与评估 .结果表明其隔振及阻尼减振效果较好 .The conventional metal screw spring vibration isolator has little damp ,and the damnification in (vibration) is easy. According to characteristic of new hi-damp vibration isolator of developed country,the (combinatorial) vibration isolators of hi-damp rubber and metal screw spring vibration isolator used to four feet and three shafts of loom have been designed respectively. The key points of structure design and design (parameters) of the vibration isolator have been given. The dynamic simulation of vibration isolator has been (realized) by means of ANSYS and ADAMS software respectively. The optimization design and evaluation of (the) (rigidity) and damp parameters of vibration isolator was performed by software .The results indicate that (the) (effect) of isolating and absorbing vibration is good. The vibration absorption projects on global structure (optimization) of the loom and weaving plant were put forward.

关 键 词：织机 减振器结构设计 动态仿真 减振实施方案 

分 类 号：TS103.33[轻工技术与工程—纺织工程]