黎蒴栲材制中纤板的工艺研究  

Research on making medium density fiberboard by breakingfruit chinkapin

作　　者：李凯夫[1] 谢桂军[1] 彭万喜[1] 张李平[1] 丁明清[1] 

机构地区：[1]华南农业大学林学院,广州510642

出　　处：《木材加工机械》2004年第6期1-5,共5页Wood Processing Machinery

基　　金：广东省林业科技项目-<速生黎蒴栲材加工利用技术研究>(校内编号4400-F03091)-资助

摘　　要：采用二次旋转组合设计试验方案和成熟的热压工艺,探索黎蒴栲纤维与新西兰速生材辐射松纤维的复合比、施胶量、成板密度对黎蒴栲材制造中纤板的影响,旨在为黎蒴栲应用于中纤板生产提供实验依据。结果表明,比较理想的黎蒴栲/辐射松纤维复合比为3∶7,施胶量为11%,成板密度为0.8g/cm3;在其条件下制成的中纤板质量符合GB/T11718-1999的要求。The paper studied three factors that include the recombination rate of Breakingfruit Chinkapin and New Zeland pinus radiate, applying glue quantity and forming plate density by revolving combined experimen- tal design and mature heat pressure craft. It indicated that 3 to 7 of recombination rate of Breakingfruit Chinkapin and New Zeland pinus radiate and 0.8g/cm3 forming plate density and 11 percent of applying glue quantity meet the necessity of GB/T11718 - 1999 again quality of medium density fiberboard by required term.

关 键 词：中纤板 施胶量 速生材 纤维复合 旋转组合 热压工艺 辐射松 密度 成熟 生产 

分 类 号：S791[农业科学—林木遗传育种] TS653[农业科学—林学]