锯齿形切屑的计算机仿真  

Computer Simulation for Serrated Chip Formation

作　　者：王亮德[1] 赵军[2] 郭胜光[3] 孟辉[2] 

机构地区：[1]滨州职业学院,山东滨州256624 [2]山东大学机械工程学院,山东济南250061 [3]济南钢铁集团,山东济南250101

出　　处：《机械工程师》2005年第2期30-32,共3页Mechanical Engineer

基　　金：全国优秀博士学位论文作者专项资金项目(200231)山东省优秀中青年科学家科研奖励基金项目(02BS074)

摘　　要：采用有限元方法仿真了不同切削速度下加工45钢的切屑形成过程。结果表明,较低切削速度下形成连续带状切屑,而高速切削时形成锯齿形切屑。通过对工件和切屑应力及温度分布的分析,探讨了锯齿形切屑的形成机理及影响因素。The chip formation processes in cutting 45 steel under different cutting speeds are simulated by means of finite element method (FEM). The results show that continuous chip is formed under relatively lower cutting speed, while serrated chip is formed under higher cutting speed. The distributions of the stress and temperature inside the workpiece and chip are analyzed to investigate the formation mechanisms and influence factors of serrated chip.

关 键 词：锯齿形切屑 有限元 切削速度 

分 类 号：TG506.1[金属学及工艺—金属切削加工及机床]