纳米m-ZrO_2+Al_2O_3复合材料力学性能的研究  

Investigation of the Mechanical Properties for the

作　　者：饶坚[1] 安惠中[1] 陈沙鸥[1] 戚凭[1] 

机构地区：[1]青岛大学理工学院物理系,山东青岛266071

出　　处：《青岛大学学报（自然科学版）》2004年第4期34-36,共3页Journal of Qingdao University(Natural Science Edition)

基　　金：山东省自然科学基金(Y2000F08)

摘　　要：研究了纳米m-ZrO_2颗粒初始含量对Al_2O_3为基体的复合材料烧结后所保留的四方相含量以及对硬度、断裂韧性和强度等力学性能的影响。随着纳米m-ZrO_2初始含量的增加，烧结样品中t-ZrO_2四方相的含量呈线性减少的趋势。纳米m-ZrO_2初始含量φ大于4％烧结样品显微硬度变化趋于稳定，当初始含量φ为4％时，样品的断裂韧性K_(IC)达到最大值5.84MPa·m^(1/2)，初始含量φ为2％时，断裂强度σf达到最大值395.0MPa，表明适量的纳米m-ZrO_2颗粒初始含量对Al_2O_3为基体的复合材料力学性能具有良好的改善作用。The present paper investigated the influence of nanometer m-ZrO_2 original contents on the reserved tetragonal phase, the hardness, the fracture toughness and the fracture strength for the sintered composites of m-ZrO_2 and Al_2O_3. The contents of t-ZrO_2 display the linear reducing trend with the increasing of nanometer m-ZrO_2 original contents. The micro-hardness of the sintered samples has the little change as the m-ZrO_2 original contents were over 4%. The fracture toughness K_(IC) and the fracture strength σ_f achieve the maximum values of 5. 84MPa · m^(1/2) at the m-ZrO_2 original contents of 4 % and 395.0 MPa at that of 2% respectively. These results displayed the addition of the nanometer m-ZrO_2 was favorable to improve the mechanical properties of the composites based Al_2O_3 as the original contents of nanometer m-ZrO_2 was suitable.

关 键 词：纳米颗粒 m-ZrO2 断裂韧性 断裂强度 

分 类 号：TB321[一般工业技术—材料科学与工程]