ABSBR处理啤酒废水的启动试验研究  

Studies on the Start-up of Treatment for Brewery Waste Water by ABSBR

作　　者：吴速英[1] 叶雪均[1] 肖隆文[1] 陈火平[1] 张继忠[1] 

机构地区：[1]江西理工大学,江西赣州341000

出　　处：《工业安全与环保》2005年第2期13-15,共3页Industrial Safety and Environmental Protection

摘　　要：研究了恒水位操作厌氧生物膜序批式反应器 (简称ABSBR)在 2 0～ 3 0℃条件下 ,采用混合菌种接种、3 6m3/h速度进泥水等措施进行处理综合站啤酒废水的启动。经 2 5天的培养驯化 ,容积COD负荷可达 2 .84kg/(m3·d) ,水力停留时间稳定在 12h ,CODcr去除率已达到 94.7% ,出水达到国家二级排放标准。In this paper,researches on ABSBR'S start up to treat brewery waste water of the synthetic station are conducted by adopting methods of mixed bacterium to inoculate and flow rate at inlet with 36m 3/h,and under temperature 20～30℃.After 25 days,the volume COD loading can reach 2.84kg/m 3,the retention time stays at 12h and COD removal efficiency can get to 94.7%.The effluent can reach the national second grade standard of discharging.

关 键 词：ABSBR 啤酒废水 生物膜 序批式反应器 启动试验 

分 类 号：X792[环境科学与工程—环境工程]