G105钢及其化学镀Ni-P合金的化学腐蚀磨损  

Behaviours of Steel G105 and Electroless Ni-P Alloy about Chemical Corrosive Wear

作　　者：赵国鹏[1] 于欣伟[1] 吴荫顺[2] 顾正秋[2] 朱日彰[2] 

机构地区：[1]鞍山钢铁学院化学工程研究中心,辽宁鞍山114002 [2]北京科技大学表面科学与腐蚀工程系,北京100083

出　　处：《鞍山科技大学学报》2000年第2期81-84,共4页Journal of Anshan University of Science and Technology

摘　　要：研究了无润滑磨损条件下 ,G10 5钢及其化学镀Ni P合金在空气和氮气中的化学腐蚀磨损行为 .结果表明 ,两种材料的磨损速度随载荷、滑动速度增大而增大 ,磨擦系数随之降低 .气体介质中的氧含量对G10 5钢影响较大 .在无润滑磨损条件下 ,化学镀Ni P合金不适合作为G10The chemical corrosive wear behaviours of steel G105 and electroless Ni-P alloy in air and nitrogen were studied in the condiction of unlubracation wear in this paper. The results show that the wear rates of the two materials increase and the friction coefficients decrease with increasing of normal load and sliding speed. Oxygen in the gas has obvious influence to the behaviours of steel G105. At the condition of unlubratation wear, it is not suitable that eletroless Ni-P alloy acts as a protective coating on steel G105.

关 键 词：G105钢 化学镀Ni—P合金 无润滑 腐蚀磨损 

分 类 号：TG172.2[金属学及工艺—金属表面处理]