短纤维／弹性体复合材料的研究V．SF／CPE复合材料的制备与性能  

RESEARCH ON COMPOSITES OF SHORT FIBER REINFORCED ELASTOMER V. PREPARATION AND PROPERTIES OF SF-CPE COPASITES

作　　者：陈占勋[1] 杨智明[1] 王可信[1] 于梅 许淑贞[1] 

机构地区：[1]青岛化工学院

出　　处：《弹性体》1994年第2期25-29,共5页China Elastomerics

摘　　要：本文讨论了ＰＥＴ、ＰＡ短纤维（ＳＦ）与ＣＰＥ热塑基复合材料的制备、基本力学性能和流变性能。探索了ＳＦ组分（种类、含量、Ｌ／Ｄ比）、粘合体系、工艺条件等对性能的影响。实验结果表明，ＨＲＨ粘合体系可显著改善复合材料的力学性能。从兼顾复合材料的物理件能与加工流变性能的角度出发，在本实验条件下，取ＳＦ为１５重量份、Ｌ／Ｄ为２２０为宜。The composites of SF (Short Fiber ) PET and PA reinforced CPE (Chlorinated Polyethylene)were prepared by blending technology, and mechanical preperties and rheological Properties werediscussed. The effects of content, aspect, ratio (L/D ) of short fiber and bonding system of fiber andmatrix on the properties were studied too. The results showed that HRH could increase tensilestrength of the composites as compared with no adhesive. The composites bed better mechanical andprocessing properties as SF was 15 phr,L/D ratio about was 220.

关 键 词：复合材料 短纤维 弹性体 

分 类 号：TQ330.6[化学工程—橡胶工业]