固相法氯磺化聚乙烯改性聚氯乙烯的研究  

STUDY ON CHLOROSULFONATED POLYETHYLENE MODIFIED POLYVINYL CHLORIDE

作　　者：赵季若[1] 尹强[1] 冯莺[1] 曹桂芳[1] 杨玉伟[1] 

机构地区：[1]青岛化工学院氯化研究室

出　　处：《弹性体》1994年第3期21-25,共5页China Elastomerics

摘　　要：本文着重讨论了氯磺化聚乙烯（ＣＳＭ）的氯含量，硫含量以及ＣＳＭ的用量对聚氯乙烯（ＰＶＣ）增韧性能的影响。实验结果表明随ＣＳＭ中的氯含量、硫含量的增加．ＰＶＣ—ＣＳＭ共混体系的位伸强度增加，冲击强度下降；随ＣＳＭ加入量的增加，体系的拉伸强度下降，冲击强度上升。ＣＳＭ作为增韧剂改性ＰＶＣ可取得比ＰＶＣ─ＣＰＥ体系更好的效果。ＰＶＣ─ＣＳＭ体系可在其冲击强度满足工业生产要求的基础上最小限度的降低拉伸强度，使拉伸强度保持在９０％左右。In this peper,the propertied of the PVC/CSM were studied. Its properties depend on the chlorine,sulfur contents of CSM,and CSM content in the blending system. As the chlorine and sulfur contents of CSM increased, the tensile strengh increased and impact strength decreased. With increasing of CSM content in the blending system, tensile strength decreaed but impact strength increase. The properties of PVC/CSM blending system are better than of PVC/CPE blending system. AS the modifying agent result of CSM modifying PVC is conterted. The reserve range of tensile strength of PVC/CSM blening system is above 90 %.

关 键 词：氯磺化 聚乙烯 聚氯乙烯 改性 弹性体 橡胶 

分 类 号：TQ333.92[化学工程—橡胶工业]