非晶硅液晶光阀的研制  

RESEARCH ON LIQUID CRYSTAL LIGHT VALVE WITH AMORPHOUS SILICON

作　　者：海宇涵[1] 李行实[1] 臧宝翠 

机构地区：[1]中国科学院电子学研究所,北京100080

出　　处：《电子科学学刊》1994年第1期48-52,共5页

基　　金：国家自然科学基金

摘　　要：用惰性小而廉价的a-Si:H膜作液晶光阀的光导层是一种理想选择。采用阻抗匹配的方法,设计和制作了a-Si:H液晶光阀。在大屏幕投影系统上获得了清晰的投影图象,分辨率为201p/mm。光阀感光度测量表明,写入光在100μw,cm^2以下,读出光随写入光线性变化。在写入光为100μw/cm^2时,瞬态响应测量结果为:上升时间60ms,下降时间80ms。It is an ideal selection to use a-Si:H film, which is cheap and with small lag, as the photoconductive layer of liquid crystal light valve. By using the method of impedance matching, an a-Si:H liquid crystal light valve is designed and fabricated, and the clear image on a large screen projective system is obtained. The resolution of the valve is 201p/mm. The sensitometry measurement shows that the projection light level varies linearly with the writing light level when the latter is below 100μW/cm2. The measurement of transient response at the writing light level of 100μW/cm2 indicates that the rise time is 60ms and the decay time is 80ms.

关 键 词：液晶光阀 阻抗匹配 投影 非晶硅 

分 类 号：TN141.9[电子电信—物理电子学]