表面加工对T8MnA钢疲劳强度影响的研究  

RESEARCH ON THE EFFECT OF SURFACE FINISHMENT ON FATIGUE STRENGTH OF CARBON TOOL STEEL T8MnA

作　　者：靳尔昌[1] 王景珍[1] 张兆臣 马壮闻 

机构地区：[1]东北林业大学,大庆石化总厂晴纶厂,黑龙江省机械制造学校

出　　处：《东北林业大学学报》1994年第5期91-95,共5页Journal of Northeast Forestry University

摘　　要：对Ｔ８ＭｎＡ钢制造板弹簧的试样进行热处理后，分组采用喷九处理、磨削加工等强化方法表明，减少表面粗糙度Ｒａ值、增大残余压应力是提高Ｔ８ＭｎＡ钢疲劳强度的有效措施。同时指出，对于板弹簧类的零件，热处理后喷丸处理是提高疲劳强度的重要手段。实验证明，在热处理过程中采取减少氧化和脱碳的措施，ＴＳＭｎＡ钢完全可以达到ＳＣｒＶＡ钢使用性能的要求。Plate springs made of TSMnA steel were heat treated,injected steel ball intoand ground. These finishments could decreased the fitigue of surface,androughness Ra and increase residual pressure.Meanwhile,the report indicated thatthe injecting steel ball treatment after heat treatment was important to increasethe reinforcement for parts such as plate spring.Experiments proved that if we had some ways to decrease oxidation anddecarburizotion in heat tveatment、T8MnA sted utilization behavior could be asgood as that of 5CrVA steel.

关 键 词：疲劳强度 喷丸处理 碳素工具钢 

分 类 号：TG113.255[金属学及工艺—物理冶金]