高速钢淬火回火状态的压缩力学性能研究  

Investigation of Compression Mechanic Behavior of HSS in Quenching and Annealing

作　　者：杨瑞成[1] 季根顺[1] 戴刚 孙伯文 杨玉贵[1] 

机构地区：[1]甘肃工业大学机械工程一系,兰州电机厂

出　　处：《甘肃工业大学学报》1994年第2期30-34,共5页Journal of Gansu University of Technology

基　　金：甘肃省自然科学基金

摘　　要：对Ｗ６Ｍｏ５Ｃｒ４Ｖ２（Ｍ２）高速钢模具材料及其它常用模具钢的各种热处理状态的压缩性能进行了研究。研究表明压缩试验能充分显示高硬度模具材料的强度与塑性，高速钢的抗压屈服应力σ＿（ｓｃ）明显高于其它常用模具钢，达５００ＭＰａ以上，基于力学状态的分析，证实σ＿（ｓｃ）与洛氏硬度ＨＲＣ之间存在良好的线性关系．并指出决定σ＿（ｓｃ）的主要因素是马氏体组织的强度与碳化物的性质、状态。The compression behavior of die materials of HSS W6Mo5Cr4V2(M2)and otherdie steel under the condition of different heat treatments is investigated.It is shown that thestrength and plasticity of the die materials with high hardness can well be demonstrated bythe compression test showing a much higher compression yielding stress σ_(sc) by HSS than bycommon die steel amounting to more than 500 MPa.Based on the mechanic analysis,it isproved that a favorable linear relationship exists between σ_(sc) and Rockwell hardness HRC.Itis also pointed out that σ_(sc) depends basically upon the strength of the martensitic structure andthe properties and conditions of the carbides.

关 键 词：压缩强度 高速钢 淬火 回火 

分 类 号：TG142.45[一般工业技术—材料科学与工程]