顺排翅片管束加扰流件强化传热和阻力特性的试验研究  

Experimental investigation of characteristics of heattransfer augmentation and reslstance of Inserteddistributers of aligned finned tube banks

作　　者：陈听宽[1] 田永生[1] 陈宣政[1] 荆建刚[1] 许志键 

机构地区：[1]西安交通大学,抚顺石油二厂研究所

出　　处：《化工机械》1994年第3期125-131,共7页Chemical Engineering & Machinery

摘　　要：本文通过试验研究，对比了顺排翅片管束与管间加扭带、角钢和圆管时的传热和阻力特性，指出加扭带可强化传热３％－７％，管束阻力约增加３０％；加角钢可强化传热６％－２０％，管束阻力约增加１９％－４０％；加圆管可强化传热０．３％－３．５％，管束阻力约增加５％。加扰流件在低流速时的效果好于高流速时的。A comparison was made of characteristics of heattransfer and resistance by inserting twisted belts, anglesteel, and tubes among aligned finned tube banks and tubeswith experiments. It is pointed out that heat transfer effi-ciency can increase by 3%-7%and resistance of tubebanks can increase by about 30% by inserting twistedbelts; heat transfer efficiency can increase by 6%-20%and resistance of tube banks can increase by about 19%-40%by inserting angle steel, heat transfer efficiency canincrease by 0.3%-3.5% and resistance of tube banks caninerease by about 5% by inserting tubes. The retsult of in-serting disturbers in low flow velcoity is better than the re-sult in hlgh flow velocity.

关 键 词：翅片管 传热 阻力 换热器 

分 类 号：TQ051.501[化学工程]