聚乙二醇含量对纳米TiO_2多孔薄膜性质的影响  

Effects of Polyethylene Glycol Concentration on Properties of Nanocrystalline Titania Porous Films

作　　者：步绍静[1] 靳正国[1] 刘晓新[1] 杨立荣[1] 程志捷[1] 

机构地区：[1]先进陶瓷与加工技术教育部重点实验室,天津大学材料学院天津300072

出　　处：《Journal of Semiconductors》2005年第2期329-334,共6页半导体学报（英文版）

基　　金：天津市重点基础研究资助项目 (批准号 :F10 3 0 0 4)~~

摘　　要：以钛酸丁酯为无机原料、二乙醇胺作稳定剂 ,加入聚乙二醇 (PEG)作模板制备前驱体溶胶 ,通过溶胶 凝胶工艺和浸渍提拉技术在玻璃基片上制备了孔径在 10～ 10 0 0nm范围内可调的纳米TiO2 多孔薄膜 .通过ESEM ,AFM ,UV VIS ,N2 吸附 ,XPS和XRD等测试手段研究了PEG(10 0 0 )的加入量对薄膜结构及性能的影响 .结果表明 ,当10 0mL溶胶中PEG的加入量在 4 0 g左右时 ,可以得到三维扩展的多孔结构 ,孔的形状规则且分布均匀 ,孔径为2 0 0～ 5 0 0nm ,薄膜比表面积可达 76 1m2 /g ,而过多的PEG加入量反而导致薄膜性能下降 .Nanocrystalline titania porous films are prepared on glass substrates via a sol-gel dip-coating method from a tetrabutylorthotitanate solution that contains diethanolamine as the stabilizer of titanium alkoxide and polyethylene glycol (PEG) as a template.The pore size is tunable in range of 10～1000nm.The influence of PEG(1000) concentration upon the properties of the TiO 2 films is studied by means of ESEM,AFM,UV-VIS,viscosity measurement,N 2-adsorption,XPS,and XRD.Experimental results show that at the PEG amount of 4 0g in 100mL solution,a three-dimensionally extended porous structure can be obtained,in which fine-shaped pores sized from 200 to 500nm are distributed homogeneously.The surface area of the film is 76 1m2/g.Nevertheless,excessive addition of PEG leads to deterioration of the film properties.

关 键 词：纳米TIO2 多孔薄膜 聚乙二醇 溶胶-凝胶法 

分 类 号：O614.33[理学—无机化学]