齿边窄条浮阀性能研究  

An experimental study on properties of curving narrow strip float valve

作　　者：周三平[1] 樊玉光[1] 陈兵[1] 

机构地区：[1]西安石油大学机械工程学院,陕西西安710065

出　　处：《石油化工设备》2005年第2期11-13,共3页Petro-Chemical Equipment

摘　　要：在 10 0 0mm× 35 0mm的矩形试验塔中 ,采用水 空气冷模试验系统对齿边窄条浮阀和F1圆形浮阀进行了对比试验 ,测定了多种气液负荷下 2种浮阀塔板的压降、雾沫夹带量及漏液量等流体力学性能。利用氧解吸法计算传质效率 ,测定了塔板传质效率。试验塔中降液管面积占 7.97% ,溢流堰高 5 0mm ,齿边窄条浮阀升启高度为 9mm ,开孔率为 11.89%。实验中主要参数的变化范围 :液流强度 0～ 30m3/ (m·h) ,气速 0～ 3m/s。吸收塔为直径 2 0 0mm的鲍尔环填料塔。试验结果表明 ,齿边窄条浮阀塔板比F1圆形浮阀塔板的效率高 ,压降低 。The comparision experiment is performed between curving narrow strip float valve and F1 circular float valve in an experiment tower of (1000mm)×(350mm) by employing a tipcal model experiment system of water-air. From the experiment, many hydraulic properties, such as tray pressure drop, entrainment rate and weeping rate are gained, and mass transfer tray efficiency is calculated through the method of oxygen-desorption. The downcomer area in the experiment tower is (7.97%), with weir height (50mm), ascending height of the curving narrow strip valves (9mm), and the hole ratio (11.89%). The varying scope of main parameters are: liquid flow strength 0～0m^3/(m·h)), gas velocity 0～(3m/s). The absorption tower with (200mm) diameter is equipped with pall packings. From the experiment, it can be seen that compared with the plate equipped with F1 circular float valve, the tray efficiency of curving narrow strip float valve is higher, pressure drop is lower, and processing capability is higher.

关 键 词：浮阀板 压降 雾沫夹带 泄漏 板效率 

分 类 号：TQ053.5[化学工程]