凝固路径对Al-4.5%Cu合金共晶相体积分数影响的数值模拟研究  

Simulation Research on Influence of Solidification Path on Volume Fractions of Eutectic Phase in Al-4.5%Cu Alloy

作　　者：刘永刚[1] 陈光[1] 孙国雄[2] 

机构地区：[1]南京理工大学金属纳米材料与技术联合实验室,江苏南京210094 [2]东南大学材料科学与工程系,江苏南京210096

出　　处：《热加工工艺》2005年第2期61-64,共4页Hot Working Technology

基　　金：国家自然科学基金资助项目(59974011)

摘　　要：通过Al 4.5%Cu合金铸锭显微偏析形成的数值模拟,研究了凝固路径对凝固后铸锭不同位置处共晶相体积分数的影响。在显微偏析模型中考虑了树枝晶粗化、固相溶质逆扩散、枝晶尖端过冷、随温度变化的溶质扩散系数等影响显微偏析形成的动力学因素。数值方法中采用变网格技术跟踪移动界面,通过迭代求解溶质扩散方程和溶质守恒方程计算显微偏析参数。结果表明,不能仅靠局部凝固时间来分析共晶相体积分数的变化,还要考虑凝固路径的影响。Effects of solidification conditions on volume fractions of eutectic phase after solidification at different locations in the ingot of Al-4.5%Cu alloy were studied by microsegregation forming simulation. The main kinetic factors effecting microsegregation were accounted for in the modeling such as secondary arm coarsening, solid state back diffusion, primary tip undercooling and variable diffusion coefficients according to temperature. Deforming grids technology was applied for tracking the moving interfaces, iterative method was applied for resolving diffusion equation and solute balance equation. The simulation shows that the volume fractions of eutectic phase are affected not only by local solidification time but also by solidification path.

关 键 词：凝固路径 共晶相体积分数 数值模拟 

分 类 号：TG111.4[金属学及工艺—物理冶金]