检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
机构地区:[1]浙江大学材料与化学工程学院,浙江杭州310027
出 处:《电子元件与材料》2005年第5期33-36,共4页Electronic Components And Materials
基 金:国家863计划资助项目(NO.2003AA302760);浙江省重大科技攻关项目(NO.021101562)
摘 要:研究了Bi2O3对CLNT陶瓷的烧结性能、物相和介电性能的影响.添加4%~10%(质量分数)Bi2O3,在液相Bi2O3和Bi2O3-TiO2两重作用下,烧结温度降至1050℃.XRD分析表明:斜方钙钛矿相出现分裂,产生第二相.随Bi2O3含量增加,Q·f值下降,τf向负温度系数方向移动,当0<w(Bi2O3)≤4%,εr基本不变;w(Bi2O3)>4%,εr因气孔增加而减小.4%Bi2O3试样在1050℃烧结4h,εr为37.8,Q·f为11030GHz,τf为12×10-6℃-1.The effects of Bi2O3 addition on the sinterability, crystal structure and dielectric properties of CLNT ceramics were investigated. The sintering temperature was decreased from 1 150℃ to 1 050℃ with 4 wt%~10 wt% Bi2O3 addition due to Bi2O3 and Bi2O3-TiO2 liquid phase sintering effect. X-ray diffractometry analyses results indicate that the phase divide and produce the second phase.When mass fraction of Bi2O3 is less than 4wt%,the dielectric constant change a little. When mass fraction of Bi2O3 is more than 4wt%,the dielectric constant decreases due to pore .The Q·f value decrease owing to Bi2O3-TiO2 phase formation and the τf values are shifted toward negative direction with the increase of Bi2O3 addtion.The εr value of 37.8, Q·f value of 11 030 GHz and τf value of 12×10–6℃–1 are obtained for CLNT ceramics with 4 wt% Bi2O3 sintered at 1 050℃ for 4 h.
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.222