高密度聚乙烯塑料压力管道热板焊接头应力分布有限元分析  

Finite-element Analyses on Stresses Distribution of Hot-plate Welded Joint of High-density Polyethylene Plastic Pressure Pipes

作　　者：王建平[1] 霍立兴[1] 谷侃锋[2] 

机构地区：[1]天津大学材料科学与工程学院,天津300072 [2]中国科学院沈阳自动化研究所,辽宁沈阳110015

出　　处：《压力容器》2005年第4期13-16,9,共5页Pressure Vessel Technology

基　　金：国家自然科学基金资助项目 (5 0 0 75 0 61)

摘　　要：基于热粘弹性积分型本构关系,考虑材料性能依赖于温度变化及相变潜热的影响,利用AN SYS热-力耦合及载荷步功能模拟结晶型高密度聚乙烯(HDPE)塑料压力管道热板焊接过程,并对焊接接头的应力分布进行有限元分析,得到了环向、轴向以及径向瞬态应力分布的基本规律。采用盲孔法和锯切法测量焊后残余应力。Based on constitutive relationship of thermal viscoelastic integral-mode and the properties of material, which depend on temperature fluctuation and the effect of phase-transition latent heat, heat-force coupling function and load step character of ANSYS were employed to simulate the hot-plate welding procedure of high-density polyethylene (HDPE) plastic pressure pipe. The finite-element analyses on stresses distribution of welded joint was conducted, and transient stresses distribution pattern in axial, radial, and circumferential directions were obtained. Residual stresses was measured by blind hole drilling method and the cutting method, it proved that the actual measuring results of the residual stresses are basically coincident with the results of numerical analysis.

关 键 词：HDPE 压力管道 应力分布 有限元分析 

分 类 号：TG405[金属学及工艺—焊接]