粉末冶金温压工艺制备Fe-Cu-C材料  

Preparation of Fe-Cu-C Powder Metallurgy Material by Warm Compaction

作　　者：李金花[1] 倪东惠[1] 朱权利[1] 张文[1] 邵明[1] 

机构地区：[1]华南理工大学机械工程学院金属新材料制备与成形广东省重点实验室,广东广州510640

出　　处：《机械工程材料》2005年第5期38-40,共3页Materials For Mechanical Engineering

基　　金：国家自然科学基金资助项目(50135020)

摘　　要：采用两种温压专用润滑剂,在不同温度和压力下以温压技术制备铁基粉末冶金材料,比较其烧结密度的变化,并分析温压工艺对密度的影响。结果表明:此温压工艺在610MPa压制压力、140℃压制温度下可制备出烧结密度最高达到7.18g/cm3,抗拉强度最高达到550MPa的Fe2%Cu-1%C铁基粉末冶金材料。Two different warm compaction lubricants were used to prepare iron-base powder metallurgy material using warm compaction technique at different compaction temperatures and pressures. Effect of warm compaction on compact density was studied. Results show that under the conditions of compaction pressure of 610 MPa and compaction temperature of 140℃, an Fe-2%Cu-1%C powder metallurgy material with density up to 7. 18 g/cm3 and tensile strength up to 550 MPa can be obtained using warm compaction technique.

关 键 词：铁基粉末冶金材料 温压 力学性能 

分 类 号：TF125[冶金工程—粉末冶金]