三维复杂槽型铣刀片应力场的有限元分析  

Stress field of 3D complex groove insert finite element analysis

作　　者：吴明阳[1] 高东宇[1] 吴勃生[2] 王晓生[1] 

机构地区：[1]哈尔滨理工大学科技处,哈尔滨150080 [2]东北林业大学机电学院,哈尔滨150040

出　　处：《黑龙江科技学院学报》2005年第3期137-140,共4页Journal of Heilongjiang Institute of Science and Technology

基　　金：国家自然科学基金项目(50275042);黑龙江省教育厅海外学人重点项目(1054HZ006);哈尔滨市青年基金项目(2004AFQXJ040)

摘　　要：为提高铣刀的使用寿命,对波形刃铣刀片的应力场进行了有限元分析。通过铣削力实验,对不同切削参数下的波形刃铣刀片的铣削力进行动态采集,利用UG中的建模模块进行了波形刃铣刀片实体建模,根据切削力实验结果给出了边界条件,在波形刃铣刀片有限元模型上进行载荷加载,利用UG有限元分析模块,获得了波形刃铣刀片切削过程中切入、切出的瞬时应力场云图,显示了切削中铣刀片应力场的变化规律。结果显示:波形刃铣刀片的应力主要分布在主切削刃上,产生磨损,与实际情况完全吻合,为铣刀片优化设计提供了依据。The paper presents the finite element analysis of the stress-field of wave milling insert. The practices consist of the collection of the milling force of wave milling insert under different cutting parameter by Dynamic Data Collection System and according to the experiment of milling force, the construction of the model of wave milling insert by the modeling module in UG, the realization of the border condition based on the experiment result of milling force, the exertion of load on the model of finite element of wave milling insert, and the completion of wave milling insert's instantaneous stress-field nephogram of cut-in and cut-out in cutting process by the structures module in UG, showing the change rule governing the stress-field of wave milling insert in cutting. The result shows that the stress of the wave milling insert is distributed primarily on the main cutting-edge, resulting in the abrasion on the main cutting-edge, in conformity with actual abrasion and dilapidation. The practices offer a basis for the optimum design of wave milling insert.

关 键 词：三维复杂槽形 波形刃铣刀片 应力场 有限元分析 

分 类 号：TG501.3[金属学及工艺—金属切削加工及机床]