检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
机构地区:[1]西北工业大学自动化学院,陕西省西安市710072 [2]西安交通大学电气工程学院,陕西省西安市710049
出 处:《中国电机工程学报》2005年第10期60-64,共5页Proceedings of the CSEE
基 金:国家863计划项目(2002AA755023)。~~
摘 要:针对高压大功率器件存在的窄脉冲问题,提出了新型的采用零序电压注入(Zero-SequenceVoltageInjection即ZSVI)补偿方法来消除窄脉冲的影响。在三相参考电压中注入零序电压,消除了输出线电压中窄脉冲带来的谐波分量和负序分量。仿真与试验结果表明,这种PWM方法在控制中点电位波动的同时,补偿了窄脉冲的影响。采用ZSVI方法后增加了输出电压,输出电压THD大大减小,输出电压THD不再受增加最大最小窄脉冲宽度影响,从而可以提高系统的可靠性。As to the Narrow Pulse Width (NPW) Problem of high-voltage high-power semiconductors, a novel compensating NPW technique of named Zero-Sequence Voltage Injection (ZSVI) technique is first proposed to eliminate the influence of the NPW on the inverter. Injection of zero-sequence voltage to three-phase referece voltages can remove harmonic components and negative-sequence voltage components of the output voltage induced by narrow pulses. Simulation and experimental results show that the effect of narrow pulses can be compensated by using the technique , at the meantime neutral-point potential fluctuations can be controlled. Due to the ZSVI technique output voltages can be increased, the THD of output voltage can also be greatly reduced, and the THD of output voltage is no longer affected by increasing minimum turn-on pulse width and turn-off pulse width, therefore system reliability will be improved.
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.15