FEROQUENCH2000水基淬火液在预硬化模块上的应用  

The Application of FEROQUENCH 2 000 Water Base Quenching Liquid on the Pre-hardening Module

作　　者：薄鑫涛[1] 张振中 

机构地区：[1]宝钢集团上海五钢有限公司,上海201900 [2]上海德润宝特种润滑剂有限公司,上海200041

出　　处：《大型铸锻件》2005年第2期9-12,共4页Heavy Casting and Forging

摘　　要：研究了FEROQUENCH2000水基淬火液浓度、介质温度、搅拌对冷却性能的影响,并结合实际生产测定了介质的换热系数,吨钢耗量、淬火液对环境的影响以及使用效果。指出12%FEROQUENCH2000水基淬火液可以起到代替淬火油的作用,在高合金钢模块预硬化的应用上获得成功。This article has described how the concentration, the medium temperature, the agitation of the FEROQUENCH 2 000 water base quenching liquid affects the cooling performance, and based on the actual operation the heat transfer coefficient of the medium, the steel tonnage consumption and the quenching liquid which affect the environment and the utilization have been measured as well, which indicates that 12% FEROQUENCH 2 000 water base quenching liquid can replace the quenching oil, and have been successfully applied on the pre-hardening of the high alloy steel module.

关 键 词：水基淬火液 预硬化 应用 模块 介质温度 冷却性能 换热系数 使用效果 高合金钢 淬火油 

分 类 号：TG154.4[金属学及工艺—热处理] TG142.45[金属学及工艺—金属学]