检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:王晶[1] 隋同波[1] 文寨军[1] 范磊[1] 张忠伦[1]
出 处:《水泥工程》2005年第3期5-7,共3页Cement Engineering
基 金:国家"973项目";其项目编号:2001CB610702
摘 要:研究了在硅酸盐水泥熟料中引入C4A3的条件、生料的易烧性、适宜的煅烧温度及水泥的性能。研究结果表明,合理的矿物组成、掺入适量的石膏和助熔剂是实现C3S-C4A3共存的前提条件。通过在C3S-C4A3S-C2S-C4AF熟料体系中引入5%~20%的C4A3S,所制备的熟料体系具有良好的强度性能,其3d强度在15~30MPa,7d强度在25~40MPa,28d强度在45~65MPa之间。The condition of inducting C_4A_3 in Portland cement clinker as well as the burnability of raw mix, siutable burning temperature and cement performances were studied. The results show, to fulfill concomitance of C3S and C4A3 S, both a reasonable mineral constituents and mixing siutable gypsum and fluxing agent are needed.The clinker system made from inducting 5~20 persent C4A3 S in C3S-C4A3 S-C2S-C4AF clinker system would have better strength performance,its stremgth of 3 d ,7 d and 28 d might be between 15~30 MPa, 25~40 MPa and 45~65 MPa respectively.
关 键 词:硅酸盐水泥熟料 C4A3S^- 早强 煅烧温度 研究结果 矿物组成 前提条件 C4AF 强度性能 易烧性 助熔剂 C3S 生料 石膏
分 类 号:TQ172.71[化学工程—水泥工业] TQ172.727[化学工程—硅酸盐工业]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.175