内循环生物流化床反应器处理废水参数选择  被引量:5

Choosing of key parameters of ITFB in wastewater treatment

在线阅读下载全文

作  者:温沁雪[1] 施汉昌[1] 陈志强[2] 

机构地区:[1]清华大学环境科学与工程系 [2]哈尔滨工业大学市政环境工程学院,黑龙江哈尔滨150090

出  处:《哈尔滨工业大学学报》2005年第6期721-723,共3页Journal of Harbin Institute of Technology

基  金:国家高技术研究发展计划资助项目(2002AA601200).

摘  要:为了提高反应器的处理效率,综述了内循环生物流化床反应器在运行过程中关键参数对其处理效果的影响,指导实际处理过程中如何选择水力停留时间、载体和接种污泥投加量以使反应器快速启动,以及如何控制气含率、载体投加量和生物膜特性等参数.反应器启动阶段建议采用<0.5h的水力停留时间和低接种污泥浓度.在一定范围内较高的载体投加量有助于提高反应器的处理效果.The effects of key parameters on the performance of internal-circulation three-phase bio-fluidized bed (ITFB), a newly developed wastewater treatment technology, were discussed. The objective of this paper is to instruct the operation in practice on how to start up the reactor rapidly by choosing the right hydraulic retention time (HRT), carrier concentration and sludge inoculation concentration, and how to control the parameters such as gas holdup, carrier concentration and characteristics of biofilm in order to operate the reactor effectively. A short HRT of 0.5 h and less sludge inoculation concentration at the start up stage were proposed and more carrier concentration leads to higher efficiency. Other parameters were proposed to be chosen according to the practice.

关 键 词:内循环生物流化床 关键参数 气含率 生物膜 

分 类 号:TU991.2[建筑科学—市政工程]

 

参考文献:

正在载入数据...

 

二级参考文献:

正在载入数据...

 

耦合文献:

正在载入数据...

 

引证文献:

正在载入数据...

 

二级引证文献:

正在载入数据...

 

同被引文献:

正在载入数据...

 

相关期刊文献:

正在载入数据...

相关的主题
相关的作者对象
相关的机构对象