珠光体可锻铸铁第二阶段热处理工艺研究  

Study on Technology of Second Stage Heattreatment for Pearlitic Malleable Iron

作　　者：徐静[1] 张方[1] 张希俊[1] 苏建民[1] 刘玉英[1] 

机构地区：[1]昆明理工大学机电工程学院,云南昆明650093

出　　处：《云南冶金》2005年第3期40-43,共4页Yunnan Metallurgy

摘　　要：课题是对影响珠光体可锻铸铁组织及性能的因素进行研究,从而优化珠光体可锻铸铁热处理工艺。通过试验,先初步探讨了第二阶段热处理工艺对珠光体可锻铸铁机械性能的影响。试验结果表明,回火温度比淬火温度对机械性能的影响大。因此,在珠光体可锻铸铁第二阶段热处理时,应主要控制好回火温度。In order to optimize the heat treatment technology for pearlite malleable iron,experiment has been carried out on the basis of study on factors that have influence on the structure and properties of pearlitic malleable iron.At first,the influence of technology of second stage heat treatment on the mechanical properties of pearlitic malleable iron is investigated,and results show that the draw tempering temperature has more influence on the mechanical properties than quenching temperature does.Therefore,it is important to properly control the tempering temperature during the second stage heat treatment.

关 键 词：第二阶段热处理温度 珠光体 可锻铸铁 机械性能 

分 类 号：TG15[金属学及工艺—热处理]