氯化镁电解阴极过程机理及液镁析出状态的研究  

STUDIE5 ON THE MECHANISM OF THE CATHODE PROCESS AND THE MORPHOLOGY OF LIQUID MAGNESIUM DEPOSIT IN ELECTROLYSIS OF MAGNESIUM CHLORIDE

作　　者：张永健[1] 罗亮明[1] 

机构地区：[1]中南工业大学有色冶金系

出　　处：《中南矿冶学院学报》1994年第2期176-181,共6页

基　　金：国家自然科学基金

摘　　要：在７００～７５０℃的温度条件下，应用电化学稳态技术和暂态技术，对氯化镁电解镁离子的放电过程和液镁成核过程进行了研究．在此基础上考察了工艺条件对液镁析出状态的影响．研究表明：镁的析出过程是包含两个电子的受扩散过程控制的简单反应；液镁析出的相过程为三维瞬时成核过程．导出了成核速度和核心生长速度表达式．电解质氯化镁浓度、电流密度、电解温度和电极材料均能影响液镁析出状态．Studies have been made of the process of magnesium ions discharge and the nucleationand growth of liquid magnesium in magnesium chloride electrolysis at 700～750℃ by use ofelectrochemical steady and transient techniques. The cathodic overpotential of magnesium islow and mainly attributed to concentration polarization. The deposition process of magnesiumis a diffusion controlled simple reaction involving two electron transfer. Nucleation plays asignificant role at the beginning and it is an instantaneous process followed by three-dimen-tional growth．The N-η and I-t dependences for the formation and growth of nuclei are giv-en. The effect of temperature，current density，MgCl_2 concentration and cathode material onthe morphology of liquid magnesium was also studied．The path of improving the adheringstate of liquid magnesium to cathode is analyzed in terms of cathode process mechanism.

关 键 词：氯化镁 电解 液镁形貌 炼镁 

分 类 号：TF822.032[冶金工程—有色金属冶金]