碳纤维/聚苯并噁嗪复合材料的界面与力学性能的关系研究  

INVESTIGATION ON RELATIONSHIP BETWEEN INTERFACIAL AND MECHANICAL PROPERTIES OF CARBON FIBER/POLYBENZOXAZINE COMPOSITES

作　　者：卢晓春[1] 杨小平[1] 信春玲[2] 余鼎声[2] 

机构地区：[1]北京化工大学国家碳纤维工程技术研究中心,北京100029 [2]北京化工大学北京市新型高分子材料制备与加工重点实验室,北京100029

出　　处：《玻璃钢／复合材料》2005年第3期20-23,共4页Fiber Reinforced Plastics/Composites

基　　金：国家高技术研究发展计划863项目(2001AA335030)

摘　　要：本文采用含不同上胶剂的碳纤维与苯并口恶嗪树脂复合,制备碳纤维/聚苯并口恶嗪单向复合材料,研究了碳纤维表面上胶剂对于复合材料的层间剪切强度(ILSS)、弯曲性能、断口形貌及动态机械性能的影响。结果表明,含有环氧树脂上胶剂的碳纤维/苯并口恶嗪树脂基复合材料(EPCF/PBZ)的ILSS和弯曲性能优于含非环氧类树脂上胶剂的碳纤维/苯并口恶嗪树脂基复合材料(VECF/PBZ)和不含上胶剂的碳纤维/苯并口恶嗪树脂基复合材料(USCF/PBZ)。环氧树脂上胶剂改善了纤维与苯并口恶嗪树脂的粘结性能,使复合材料的内耗峰峰高降低,能量损耗减小。电镜照片同样验证了这一结果。Unidirectional composites were fabricated by using benzoxazine (BZ) resin and carbon fiber with different sizing materials. The short-beam shear and flexural properties of the composites were measured. The effect of the sizing materials of the carbon fiber on the flexural fracture morphologies and dynamic mechanical properties of the composites were studied by using SEM and DMTA, respectively. The results showed that the interlaminar shear strength (ILSS) and flexural properties of EPCF/PBZ composites were better than those of USCF/PBZ and VECF/PBZ. The loss peak of the former was lower than those of two latters. The interfacial adhesion of composites was improved by epoxy resin coating. But the unreactive coating on carbon fiber reduced the interfacial adhesion of composites. This fact was also proved by the results of SEM.

关 键 词：聚苯并噁嗪 碳纤维 界面 力学性能 

分 类 号：TB332[一般工业技术—材料科学与工程]