模态声发射技术在构件疲劳裂纹检测中的应用  

DETECTING ACOUSTIC EMISSION SIGNALS FROM FATIGUE CRACK PROPAGATION

作　　者：李耀东[1] 黄成祥[1] 侯力[1] 

机构地区：[1]四川大学制造学院,成都610065

出　　处：《振动与冲击》2005年第2期122-125,共4页Journal of Vibration and Shock

基　　金：四川省科技厅应用基础基金资助项目(D302GY029-051)

摘　　要：疲劳裂纹的萌生和扩展是机械零件在变载荷作用下的主要失效形式,在变载荷下出现疲劳裂纹的同时往往伴随着弹性波的扩散,以迅速释放其内部积累的应变能。使用近几年来得到迅速发展的模态声发射技术真实地获取疲劳裂纹的声发射波形,使接收到的声发射信号较完整地反映了声发射源的物理状态。在波形分析中采用参数分析法提取声发射波形特征,建立模态声发射参数和裂纹扩展速度之间的数学关系。由于综合采用了多种技术的优点进行信号分析、处理,因此根据声发射信号特征得到的结果将更加逼近实际状态。The origination and propagation of fatigue crack in mechanical elements under variable load is the main type of most failures. At the same time, this process is always accompanied by transmitting of elastic stress waves and rapid setting free of the accumulated energy in the interior of the structure. The modal acoustic emission (MAE) technique rapidly developed in recent years is properly introduced to more precisely acquire the actual acoustic emission (AE) signal waveform, which can be trusted to truly reflect the real physical state of the AE sources in the structure. By analyzing the signal waveform of the detected crack, the technique based on AE parameters is used to extract waveform features and correlate AE parameters with crack propagation velocity. On the basis of both MAE technique and parameter analysis method, it can be said that the result is to be more accurate than traditional AE technique in practical test.

关 键 词：疲劳裂纹 模态声发射 参数分析 

分 类 号：TP33[自动化与计算机技术—计算机系统结构]