一种水容器壳体湿法缠绕环氧树脂体系  被引量:5

EPOXY RESIN SYSTEM FOR THE PRESSURE VESSEL OF WATER TREATMENT WITH WET FIBER-WINDING

在线阅读下载全文

作  者:李海东[1] 程凤梅[1] 周文英[2] 涂春潮[2] 

机构地区:[1]长春工业大学化学工程学院 [2]西北工业大学理学院应用化学系,西安710072

出  处:《复合材料学报》2005年第3期40-44,共5页Acta Materiae Compositae Sinica

基  金:国家高技术研究发展计划(863计划)(2002AA623181)

摘  要:研究开发了一种适合以聚乙烯塑料为内衬的水容器壳体湿法缠绕成型用新型环氧树脂复合体系。进行了粘度、力学性能、耐疲劳、爆破实验。结果表明,改性环氧复合体系室温下粘度低(0.6~0.7Pa·s),凝胶期长(≥5h),可在较低温度下(60℃左右)凝胶、固化;环氧浇注体强度较高,韧性好;环氧/玻纤湿法缠绕壳体具有力学性能优异、长期耐疲劳性好、爆破强度高、成本低等优点,能够满足水处理容器湿法缠绕成型要求。A new epoxy composite system was developed, being suitable for the case of inner pressure vessels with PE as inner liner for water treatment with wet fiber-winding. The examinations of viscosity, mechanical properties and blast were done. The results show that the modified epoxy composite system has longer gel time and lower viscosity at room temperature, and it can gel and cure at lower temperature. So the composite vessel has good mechanical properties and fatigue property, higher blast strength and lower cost, being capable of water treatment with wet fiber-winding.

关 键 词:环氧树脂 聚乙烯内衬 湿法缠绕 低粘度 爆破强度 

分 类 号:TB332[一般工业技术—材料科学与工程]

 

参考文献:

正在载入数据...

 

二级参考文献:

正在载入数据...

 

耦合文献:

正在载入数据...

 

引证文献:

正在载入数据...

 

二级引证文献:

正在载入数据...

 

同被引文献:

正在载入数据...

 

相关期刊文献:

正在载入数据...

相关的主题
相关的作者对象
相关的机构对象