带有撞击式冲击阀、栅格式快开阀板的大型气冲造型机的设计  

Design of a Large Air Impact Molding Machine With Ramming Impact Valve and Grid Quick-release Valve

作　　者：谢祖锡 白彦华 李居泽 姜立贵 乔玉良 陈士梁 

出　　处：《沈阳工业大学学报》1995年第2期1-5,共5页Journal of Shenyang University of Technology

基　　金：国家自然科学基金

摘　　要：气冲造型机的实砂效果，主要取决于冲击阀开启的瞬间，由贮气室进入砂箱顶部余隙腔的冲击气流的升压速度．本设计采用撞击式冲击阀、栅格式阀板和增设较大的背包等一系列措施，使大型气冲造型机的气冲升压速度在阀板开启的最初１～２ｍｓ内迅速提高．这将使大型气冲造型机的能级、适用性及技术经济指标提高到一个新的水平．The Effect of the Air Impact molding machine on the sand compaction principally depends on the rate of increasing impact presure (dp/dt )of the air flow from the presure vassel intothe top space of the flask at the moment when the valve is opened. A Series of measuressuch as the ramming impact valve, quick- release valve and enlarged air back chamber etc.are adopted in the design to speed- up rapidly the rate of increasing impact presure (dp/dt)within the initial 1～2 milli-seconds as soon as the valve is opened.Thercafter, the energy level,applicability and technical and economical targets of the large air impact molding machinewill be increased to an. unprecedented level.

关 键 词：气流 冲击 造型机 快开阀 气冲造型机 

分 类 号：TG231.6[金属学及工艺—铸造]