Fe─Cu─C─MnS烧结钢组织形成与工艺的关系  

Relationship between the Microstructure of Fe-CuC-MnS Sintered Steel and the Process

作　　者：蔡勇[1] 王晓明[1] 赖和怡[1] 刘秀珍[1] 韩凤鳞 

机构地区：[1]北京科技大学材料系,北京粉末冶金公司实验厂

出　　处：《北京科技大学学报》1995年第3期234-238,共5页Journal of University of Science and Technology Beijing

基　　金：机械部"八五"攻关项目

摘　　要：本文通过ＳＥＭ显微组织观察及烧结过程模型研究了Ｆｅ─Ｃｕ─Ｃ─ＭｎＳ烧结钢显微组织形成与实际工艺过程的关系，认为Ｆｅ─Ｃｕ─Ｃ─ＭｎＳ烧结钢中ＭｎＳ的分布与ＭｎＳ添加方式密切相关：采用混合法添加ＭｎＳ时，ＭｎＳ通常分布在铁颗粒烧结颈附近，而采用预合金法添加ＭｎＳ时，ＭｎＳ则分布于铁颗粒内。Relationship between the microstructure of Fe-Cu-C-MnS sintered steel and the process is inverstigated by using SEM microstructure observation and sintering model. it has been found that the distribution of MnS is due to it's additive method, when MnS is admixed most of MnS is distributed near the sintering neck of two Fe powders while MnS is pre-alloyed, most of MnS is inside Fe powder.

关 键 词：粉末冶金 烧结钢 显微组织 

分 类 号：TF125.1[冶金工程—粉末冶金]