固定微生物用聚合物多孔载体的研究  

A STUDY ON THE POROUS POLYMER CARRIER FOR MICROORGANISM IMMOBILIZATION

作　　者：郑邦乾[1] 张洁辉[1] 吴中兴[1] 方治华[1] 杨平[1] 

机构地区：[1]成都科技大学高分子研究所,成都科技大学化工系

出　　处：《高分子材料科学与工程》1995年第3期112-117,共6页Polymer Materials Science & Engineering

基　　金：国家自然科学基金

摘　　要：用悬浮共聚随后碱解的方法制得了部分水解聚（丙烯酸甲酯－醋酸乙烯酯－甲基丙烯酸甲酯多孔载体（载体Ａ）。研究了聚合物组成、致孔剂、交联剂和ＮａＯＨ用量与载体Ａ孔结构的关系，用电镜、Ｘ射线衍射和电子衍射测定了载体的结构。结果表明，载体Ａ孔结构受致孔剂、交联剂和ＮａＯＨ用量及聚合物种类、组成影响较大。载体Ａ适宜于微生物固定化，固定化载体表面和孔内均聚集了大量菌群，微生物聚集量大，产甲烷量优于其它聚合物、活性炭载体与活性污泥。A porous polymer carrier of partially hydroyzed poly(methylacrylate-vinyl acetate-methyl methacrylate) (carrier A) has been prepared by suspension copolymerization and a sequent hydrolysis process.The effects of copolymer composition,the amounts of crosslinking agent and porosity agent,and the hydrolysis condition on the porous structure of the carrier A were studied.The SEM,X-ray and electron diffraction were used to examine the structure of the carrier.The experimental results have shown that the porous structure of the carrier A is strongly dependent upon the composition of copolymer,the amounts of crosslinking agent and NaOH used in hydrolysis.The carrier A can immobilizate the microorganism very well,and the immobilizate microorganisms are mainly located at the outer surface and inside wall of porosity of the carrier A.In the fermentation experiment,the carrier A immobilized microoganism can produce the more amount of methane than other polymer carrier,active carbon or active sludge can.

关 键 词：微生物 固定化 多孔聚合物 催化剂载体 

分 类 号：O643.36[理学—物理化学] TQ626.65[理学—化学]