检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
机构地区:[1]哈尔滨工业大学机械零件教研室
出 处:《哈尔滨工业大学学报》1995年第2期87-90,共4页Journal of Harbin Institute of Technology
基 金:国家自然科学基金
摘 要:介绍了二相流体润滑剂压粘关系和粘剪关系测试计算的基本方法。对20号机械油中加入5%PTFE粉的二相流体润滑剂的压粘关系和粘剪关系进行了测试。测试最高压力为100MPa,测试温度为40℃,测试最大剪切率为3.12×104S-1。测试结果表明,所测二相流体在100MPa压力范围内压粘关系基本符合Barrus方程,粘剪关系仍基本符合牛顿流体特性。his paper describes the calculation methods of pressure viscosity and viscosity shear stress relations on two phase lubricants. The test results of pressure visosity relation and the rheologic character at 36 MPa and 76 MPa are given on the two phase lubricant of No.20 machine oil + 5% PTFE powder. The test temperature is 40℃, the test pressure is up to 100MPa, and the maximum measuremental shear is 3.12 × 10℃-1. The experimental results show that the rheologic character of two phase lubricants under the pressure within 100MPa can be expressed by Barrus formula, and the viscosity and visosity shear stress relation remain the rheologic character of Newtonian fluid.
分 类 号:TH117.22[机械工程—机械设计及理论]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.185