改善渗硼层性能的研究  

Study on Improving the Properties of Boronizing Layer

作　　者：韩文祥[1] 曹晓明[1] 姜信昌[1] 李国禄 

机构地区：[1]河北工业大学材料系

出　　处：《河北工学院学报》1995年第4期59-64,共6页Journal of Hubei Polytechnic University

摘　　要：通过对单－渗硼、硼－氮共渗．硼－氮复合渗、硼－锆共渗和硼－土共渗等方法所得到的铁－硼金属间化合物分别进行了硬度梯度，脆性和耐磨性试验。试验证明，无论是复合渗还是共渗，其渗层性能都优于单－渗硼层，其中以硼－稀土共渗渗层的性能最佳．在本文试验条件下，与单一渗硼层相比，共渗和复合渗渗层的脆断强度提高３０％～５４％，相对脆性降低４７％～１１６％，相对耐磨性提高３２％～１０９％．In this paper the hardness gradient, the brittleness and the wear resistence of Fe- Bintermetallic chemicals obtained by means of single-boronning, carbonitriding-boriding,nitriding-boriding,boron-zirconizing, Re-boronig and so on are studied. It shows that the erties of layer no matter by means of carbonitriding-boriding and nitriding bonding or boron-zirconizing and Re-boronixing are better than that of single-boronning, among them the properties of layer by Re-boronning is the best. Under present conditions the brittle-fracture strength of layer of common and complex boronning is increased by 30-54%, their relative brittlpness is decreased by 47-116 % and their wear resistance is increased by 32-109% as compared with that of single-boronning.

关 键 词：脆性 耐磨性 表面合金化 渗硼层 脆断强度 

分 类 号：TG174.445[金属学及工艺—金属表面处理]