基于ADAMS的两维/三维混合仿真研究  

Study of 2D/3D Mixed Simulation Based on ADAMS

作　　者：王立新[1] 黄文良[2] 

机构地区：[1]郑州大学机械工程学院,河南郑州450001 [2]南京理工大学机械工程学院,江苏南京210094

出　　处：《系统仿真学报》2005年第8期2022-2024,共3页Journal of System Simulation

摘　　要：提出了在ADAMS中用两维曲线-曲线接触来代替实体-实体接触的方法,介绍了具体的实现过程,AutodeskInventor中实体边界轮廓的提取和离散,ADAMS/Solver中的矩阵文件格式及生成,以无返回力矩钟表机构的调速器为例,比较和分析了两种结果。发现嵌入实体的曲线-曲线接触计算结果不但效率高而且准确度也好。The method of curve-curve contact instead of solid-solid contact is presented. The realization procedure, obtaining and discretizing of the edge of the solid-model in Autodesk Inventor, format of MATRIX in ADAMS/View were described in detail. As an example, the runaway escapement was simulated. Two kinds of results were discussed and analyzed. Both the calculation efficiency and the accuracy of curve-curve contact are better than the solid-slid contact.

关 键 词：接触 两维/三维混合仿真 ADAMS AUTODESK INVENTOR 

分 类 号：TP391.9[自动化与计算机技术—计算机应用技术]