聚驱抽油机井光杆腐蚀机理及防治措施  

Mechanism and Protective Measure of Plain Rod Corrosion of Polymer Flooding Pumping Well

作　　者：杨恩钊[1] 王谦[1] 肖占立[1] 

机构地区：[1]胜利油田有限公司孤岛采油厂,山东东营257231

出　　处：《石油工程建设》2005年第4期61-62,共2页Petroleum Engineering Construction

摘　　要：针对胜利油田孤岛采油厂的聚驱抽油机井光杆腐蚀问题进行调查研究,认为聚合物溶液和氯离子的共同作用是光杆腐蚀的主要原因,并分析了腐蚀机理。根据室内试验结果,认为电刷镀层的结合力和抗腐蚀性都优于化学镀层,故决定采用电刷镀方法对光杆进行防腐保护。现场应用情况表明,采用电刷镀镀层的光杆,无腐蚀使用寿命已经达到原来的两倍以上。The investigation on plain rod corrosion of polymer flooding pumping well in Gudao Oil Production Plant of Shengli Oilfield was carried out.The experimental results in laboratory show that the adhesive and anti-corrosion abilities of brush plating are better than those of chemical plating.So the brush plating method is adopted for plain rod anticorrosion.The field application proves that the corrosion free service life of plain rod with brush plating is more than two times as long as that of the original one.

关 键 词：抽油机井 光杆 腐蚀 机理 电刷镀 效果 

分 类 号：TE983[石油与天然气工程—石油机械设备]