碳钢和耐候钢在北京城市大气环境中初期腐蚀行为  

THE INITIAL STAGE OF ATMOSPHERIC CORROSION OF CARBON AND WEATHERING STEEL IN BEIJING CITY ATMOSPHERE

作　　者：林翠[1] 李晓刚[2] 刘晓东[2] 

机构地区：[1]南昌航空工业学院材料科学与工程系,南昌330034 [2]北京科技大学材料科学与工程学院腐蚀与防护中心

出　　处：《中国腐蚀与防护学报》2005年第4期193-199,共7页Journal of Chinese Society For Corrosion and Protection

基　　金：科技部国家基础条件平台重点项目(2003data2C018);973项目"材料环境行为与失效机理"(19990650);江西省材料科学与工程研究中心课题(2×200401015)

摘　　要：对碳钢和耐候钢在北京城市大气中的初期腐蚀行为进行了研究.主要采用金相、扫描电镜、X-射线衍射方法分析和探讨了初期腐蚀层形貌、腐蚀产物和合金元素的分布.结果表明:在腐蚀初期,耐候钢表面生成的锈层较碳钢致密,裂纹和孔洞相对较少;25d后碳钢和耐候钢局部都出现了分层现象,腐蚀产物没有区别,差别主要是锈层中合金元素的作用.耐候钢锈层中有Cu、Cr合金元素的析出,聚集在裂纹处可抵御大气中水气及其有害离子的侵入,防止基体金属进一步腐蚀.This paper focuses on the initial corrosion behavior of carbon and weathering steel. The surface morphology of corrosion layer, corrosion products, structure and alloy elements of rust layer in natural city atmosphere were studied by metallographic observation, SEM and XRD. The results show that the rust layer of weathering steel was a little denser than that of carbon steel at the initial corrosion period. Two layers partly formed in both carbon and weathering steel after 25 days, there was no essential difference of corrosion products in both of them. The difference in rust layer was mainly due to the function of alloy elements. Cu, Cr elements were found in rust layer of weathering steel. They were concentrated in the cracks and voids, which prevented water, oxygen and pollutants penetrating to the steel substrate.

关 键 词：大气环境 碳钢 耐候钢 初期腐蚀 合金元素 

分 类 号：TG172.3[金属学及工艺—金属表面处理]