110tANS－OB钢包底吹氩混合特性研究  

THE MIXING CHARACTERISTICS IN 110t ANS-OB LADLF WITH BOTH BOTTOM BLOWING

作　　者：何平[1] 

机构地区：[1]冶金部钢铁研究总院

出　　处：《炼钢》1995年第6期38-42,共5页Steelmaking

摘　　要：熔池混合特性是反映钢包内成分和温度混匀快慢的能力。本文采用水力学模型法进行了研究。结果表明，在ＡＮＳ－ＯＢ钢包中，熔池均匀混合的时间受底吹流量和浸罩深度影响很大。采用直通多微孔型透气砖略比狭缝型优越。对于１１０ｔ钢包，浸罩深度应控制在１００～２００ｍｍ范围内，底吹流量相应控制在１０～１８ｍ￣３小范围内，其熔池时间可＜３ｍｉｎ。１１０ｔ钢包内熔池混合时间，当ｈ／Ｈ＝０．０３９～０．１０７７时，可由下式近似计算：The mxing characteristics in the bath is able to reflect the capability of the mixing rate of the components and the temperature in ladle. The mixing characteristics are studied by means of hydraulic model in this paper. The results show that the mixing time in the bath is great-ly influenced by the flow rate of the bottom) stirring gas and the depth of the sinking snorkel,and muti-hole plug is more effective on mixing than that of slits plug in ANS-OB ladle. The bath mix-ing time is able to be lower than 3 min when the sinking snorkel is in depth of 100～200mm and the stirring gas is in flow,rate of 10～18 m￣3/h.The approximate formula of the bath mixing time in the 110t ANS-OB ladle is as below:when h/H=O.03p～0. 1077 there is τ_(ANS)=4.5 +2559Q (h/H)￣0.5

关 键 词：钢包 底吹 混合特性 氩 熔池 

分 类 号：TF769.2[冶金工程—钢铁冶金]