高能量同轴脉冲闪光灯泵浦的掺钛宝石激光器实验研究  

Experimental Investigation of High-Energy Ti:Sapphire Laser with Coaxial Flashlamp Pumping

作　　者：高国昌[1] 李子尧[1] 蔡善明 

机构地区：[1]中国科学院安徽光学精密机械研究所

出　　处：《量子电子学》1995年第3期249-251,共3页

基　　金：国家高技术863资助项目

摘　　要：本文简述闪光灯泵浦的掺钛宝石激光器的发展概况和应用前景，叙述了用自己研制的高能量短脉冲同轴闪光灯泵浦的掺钛宝石激光器实验装置和实验结果。实验中采用本单位用提拉法生长的掺钛宝石棒，其尺寸为Φ１０×１６０ｍｍ，有效泵浦长度为１５２ｎｍ，棒的两端面镀增透膜；采用平凹型激光谐振腔，腔长３６ｃｍ；闪光灯放电脉宽为１０～１２μｓ。当泵浦输入能量为６１２Ｊ时，激光输出能量最高达到３．２Ｊ，激光能量转换效率约为０．５％。In this paper the trends of development and applications of flashlamp pumped Ti:sappliire lasers are briefly reviwed, and experimental setup and results of Ti:sapphire laser pumped by a high-energy and short-pulse coaxial flashlamp presented. The Ti:sapphire rod is Czochralsky-grown in our Institute, and cut for of Φ10×160 mm, with effective length of 152 mm. The rod ends are anti-reflection coated. Tile resonator is 36 cm flat-concave arrangement, and the discharge pulse-width of the lamp 10-12μs. When input energy is 612 J, the laser produces 3.2 J output with total efficiency of 0.5%. According to author’s knowledge, this is the highest laser output of coaxial flashlamp pumped Ti:sapphire laser to date.

关 键 词：同轴闪光灯泵浦 掺钛宝石激光 激光器 

分 类 号：TN248[电子电信—物理电子学]