微波注入实验用高隔离度双工器的研究  

Research on high-isolation diplexer used in microwave injection experiment

作　　者：胡标[1] 李家胤[1] 汪海洋[1] 

机构地区：[1]电子科技大学物理电子学院国家863计划强辐射实验室,四川成都610054

出　　处：《现代电子技术》2012年第4期205-207,210,共4页Modern Electronics Technique

基　　金：武器装备预研基金资助课题(103.1.2E022050205)

摘　　要：微波注入实验要求微波注入电路和效应监测电路的接入不影响正常的电路器件工作状态,同时要求注入电路隔离度足够大。在此设计了一种高隔离度微波双工器0～800MHz和1.4～4.5GHz,两信号通道内插入损耗小于0.2dB;0～400MHz和1.5～4.5GHz两信号通道隔离度大于50dB。这种微带线型双工器结构紧凑、研制周期短、性能稳定已经在微波效应注入实验系统中获得良好的应用。In the microwave injection experiment the insertion of the microwave injection circuit and the effect inspect circuit is required not to affect the work condition of the electrical devices.The injection circuit is required to have enough isolation.One microwave diplexer with high isolation was designed.Between 0~800 MHz and 1.4~4.5 GHz,the insertion loss of the microwave diplexer is less than 0.2 dB.The isolation between two channels is higher than 50 dB.The microwave diplexer owns the characteristics of compact structure,short developing cycle and steady performance.It works well in microwave effect injection experiment system.

关 键 词：高隔离度 双工器 注入实验 插入损耗 

分 类 号：TN6[电子电信—电路与系统]