OBS路由器中交流耦合突发模式光接收机的设计方法  

A Design Method of AC-Coupled Burst Mode Optical Receiver for OBS

作　　者：焦硕[1] 吴海珊[1] 陈晓晨[1] 徐坤[1] 林金桐[1] 

机构地区：[1]北京邮电大学55#信箱,北京100876

出　　处：《电子学报》2005年第7期1319-1322,共4页Acta Electronica Sinica

基　　金：国家八六三计划(No.2002AA122022)

摘　　要：基于拓展带宽的设计方法,提出一种适于OBS的交流耦合突发模式光接收机设计方法.分析与仿真证明该方法有效地降低由交流耦合电容引入的功率代价,并降低系统对信号频谱中低频成分的限制.在1.25Gb/s的信道速率下,本设计在300ns内实现信道同步,并达到很好的灵敏度指标,打破了交流耦合突发接收机在高速应用中的局限.A novel design method of ac-coupled burst mode optical receiver （BMOR） is investigated for optical burst switching （OBS）. The receiver has a simplest configuration of a PIN-TIA preamplifier, an ac-coupling capacitor, and a limiting amplifier. Both theoretical analysis and experimental results prove it to be a feasible method to reduce power penalty caused by the ac-coupling capacitor. Under the data rate of 1.25Gb/s,the BMOR can restore the burst within 300ns with high sensitivity. The design method breaks the limitation of ac-coupled BMOR in high speed applications.

关 键 词：光突发交换 交流耦合 突发模式 

分 类 号：TN929.11[电子电信—通信与信息系统]