二级UASB厌氧工艺在制药废水中的应用  

APPLICATION OF ANAEROBIC PROCESS OF TWO-STAGE UPFLOW ANAEROBIC SLUDGE BED IN PHARMACEUTICAL WASTEWATER

作　　者：庞艳 冀强 勾怀亮 王伟伟 冀贞泉 胡雪莲[2] 叶新强[2] 彭晓瑛[2] 林峰[3] 

机构地区：[1]济南啤酒集团白马山啤酒厂环保科研所 [2]济南市环境监测站,济南250022 [3]济南市环境监理总站,济南250022

出　　处：《环境工程》2005年第4期25-27,共3页Environmental Engineering

摘　　要：抗菌素制药污水复杂,其CODCr高达39000mgL,硫酸盐的浓度在6500mgL左右,常规工艺很难处理,山东某制药厂采用了二级厌氧工艺处理此类废水,取得了良好的处理效果和经济效益。It is very difficult for a normal process to treat an antibiotic pharmaceutical wastewater with COD_ Cr of 39 000 mg/L and sulphate concentration of about 6 500 mg/L.Two-stage anaerobic process is suggested and used for a pharmaceutical factory in Shangdong Province.Excellent effect and economic benefit have been obtained.

关 键 词：制药废水 二级厌氧工艺 生物脱硫 二级厌氧 厌氧工艺 UASB 应用 CODCR 常规工艺 工艺处理 

分 类 号：X787[环境科学与工程—环境工程] X793.03