用硫酸亚铁和过氧化氢混合体系处理丁苯橡胶生产废水  

Treatment of waste water from styrene butadiene rubber production with mixed system of ferrous sulfate and hydrogen peroxide

作　　者：曹兰花[1] 赵旭涛[1] 赵瑛[1] 

机构地区：[1]中国石油兰州石化公司石油化工研究院,甘肃兰州730060

出　　处：《合成橡胶工业》2005年第5期331-335,共5页China Synthetic Rubber Industry

摘　　要：用硫酸亚铁和过氧化氢混合体系处理了丁苯橡胶生产废水,优化了工艺条件,进行了稳定性实验,并对处理前后的废水进行了水质分析。结果表明,不必调节废水的pH值、反应温度为55℃、Fe2+用量为200mg/L、H2O2用量为1000mg/L、反应时间为40min、加入氢氧化钙将氧化处理后废水的pH值调至中性进行絮凝、加入用量为1mg/L的聚丙烯酰胺助凝,可显著降低废水中的铁离子质量浓度,提高化学需氧量去除率,同时废水的可生化性显著提高,为后续生物处理创造了良好的条件。The waste water from styrene butadiene rubber production was treated with mixed system of ferrous sulfate and hydrogen peroxide. The process conditions were optimized and the stability experiments were done. The quality of waste water were analyzed. The results showed that the mass concentration of Fe ion decreased remarkably and chemical oxygen demand removal increased when the pH value of waste water was not adjusted, the reaction temperature was 55 ℃ ,the amount of Fe^2＋ was 200 mg/ L,the amount of hydrogen peroxide was 1 000 mg/L,the reaction time was 40 min,calcium hydroxide was added to adjust the pH value of treated waste water to neutrality and was flocculated, and the amount of polyacrylamide 1 mg/L was added to assist flocculation. Meanwhile,the biodegradability of waste water was improved evidently and the good conditions for following biotreatment were created.

关 键 词：丁苯橡胶 催化氧化 硫酸亚铁 过氧化氢 废水 

分 类 号：X783[环境科学与工程—环境工程]