关于空气压缩机后冷却器流程选择的探讨  

DISCUSSION ON FLOW SHEET SELECTION FOR POST COOLER OF AIR COMPRESSOR

作　　者：江飞飞[1] 江楠[1] 卞淞霖[1] 王延顼[1] 邓波[1] 

机构地区：[1]华南理工大学工业装备与控制工程学院,广东广州510641

出　　处：《石油化工设备技术》2005年第4期30-32,共3页Petrochemical Equipment Technology

摘　　要：对空气压缩机后冷却器流程的选择提出了新见解。文章分析指出,综合空气压降和总传热系数两方面因素,一般情况下,建议将折流板间距与壳体内径的比值(h/D)设置在0.6～0.7之间并选择热空气走壳程的方案；若仅希望冷却器具有较低的空气压降,建议将折流板间距与壳体内径的比值(h/D)设置在大于0.7的范围,并选择热空气走管程的方案。A new opinion on flow sheet selection for post cooler of air compressor was put for- ward in this article.The analysis of this article denoted that:synthesizing the two factors of air pressure drop and overall heat transfer coeffi- cient,the ratio(h/D)between baffle space and inside diameter of shell should be 0.6 to 0.7 un- der common condition,and selected the plan of hot air feeding into the shell side.If cooler with lower pressure drop,the ratio(h/D)between baffle space and inside diameter of shell should be larger than 0.7,and selected the hot air feed- ing into tube side.

关 键 词：后冷却器 传热系数 压降 

分 类 号：TH45[机械工程—机械制造及自动化]