Effect of Thermal Buoyancy on Fluid Flow and Inclusion Motion in Tundish without Flow Control Devices——Part II :Inclusion Motion  

作　　者：ZHANG Li-feng 

机构地区：[1]University of Illinois at Urbana Champaign, Urbana IL 61801, USA

出　　处：《Journal of Iron and Steel Research International》2005年第5期11-17,共7页

摘　　要：Following up the fluid flow simulation in a 60 t tundish, the trajectories of inclusions in the 60 t tundish without flow control are simulated by considering the force balance between the drag force and the inertial buoyancy force. The Stochastic model yields more accurate inclusion motion than the non-Stochastic model due to including the effect of the turbulent fluctuation. The average residence time of inclusions decreases with increasing size. The thermal buoyancy favors inclusions removal especially the small inclusions. Using solute transport like the dye injection in water model and copper addition in the real steel tundish cannot accurately study the motion of the inclusions. In the simulation, more than 68% inclusions bigger than 10μm are removed to the top, and less than 32% enters the mold. The thermal buoyancy has little effect on the fraction of inclusions moved to the top of the inlet zone, and it mainly favors the removal of inclusions smaller than 100μm to the top surface of the outlet zone. For inclusions bigger than 100μm, the effect of thermal buoyancy on their motion can be ignored compared to the inertial buoyancy effect.Following up the fluid flow simulation in a 60 t tundish, the trajectories of inclusions in the 60 t tundish without flow control are simulated by considering the force balance between the drag force and the inertial buoyancy force. The Stochastic model yields more accurate inclusion motion than the non-Stochastic model due to including the effect of the turbulent fluctuation. The average residence time of inclusions decreases with increasing size. The thermal buoyancy favors inclusions removal especially the small inclusions. Using solute transport like the dye injection in water model and copper addition in the real steel tundish cannot accurately study the motion of the inclusions. In the simulation, more than 68% inclusions bigger than 10μm are removed to the top, and less than 32% enters the mold. The thermal buoyancy has little effect on the fraction of inclusions moved to the top of the inlet zone, and it mainly favors the removal of inclusions smaller than 100μm to the top surface of the outlet zone. For inclusions bigger than 100μm, the effect of thermal buoyancy on their motion can be ignored compared to the inertial buoyancy effect.

关 键 词：numerical simulation thermal buoyancy fluid flow INCLUSION solute particle Stochastic model TRAJECTORY residence time 

分 类 号：TF703[冶金工程—钢铁冶金]