CMOS四路可加权高频模拟开关的设计和研究  

The Design of a 4-channel Programmable High Frequency Analog Switch

作　　者：饶源[1] 朱大中[1] 

机构地区：[1]浙江大学信息与电子工程学系,杭州310027

出　　处：《固体电子学研究与进展》2005年第3期310-314,共5页Research & Progress of SSE

基　　金：国家自然科学基金资助项目(60176027);浙江省自然科学基金资助项目(600026)

摘　　要：介绍了一种可对高频信号进行取样、加权、控制、叠加的模拟信号处理开关集成电路,通过两个高宽长比的高跨导NM O S晶体管可实现权值的粗调和微调。该电路采用标准0.6μm CM O S工艺制造。测试结果表明:该电路的工作频段为50~250 MH z时,导通时最小插入损耗约为-5.0^-10.5 dB,关断时隔离度可达-40.5^-23.4 dB左右;其连续可调的加权动态范围最大值为21.3 dB。An analog switch IC in signal processing is presented, which can fulfill the functions of sampling, weighting, controlling and summing of high frequency analog signals. Two N-MOSFETs with high W/L ratio can fine tune and coarsely tune the attenuation. The chip has been implemented in the standard 0.6 μm CMOS process. The measurement results show that the minimum insertion loss is about --5.0- -10.5 dB, the maximum isolation is -40.5--23.4 dB; and the maximum continually tunable dynamic range is 21.3 dB from 50 to 250 MHz.

关 键 词：互补金属氧化物半导体集成电路 模拟信号处理 高频模拟开关 

分 类 号：TN431.1[电子电信—微电子学与固体电子学]