印染废水起始惰性溶解有机物的测定  

Measurement of initial soluble inert organic matter in dyeing wastewater

作　　者：张志峰[1] 于静洁[1] 顾国维[1] 

机构地区：[1]同济大学环境科学与工程学院,上海200092

出　　处：《给水排水》2005年第9期64-66,共3页Water & Wastewater Engineering

基　　金：国家自然科学基金重点项目(50138010)。

摘　　要：介绍4种测定起始惰性溶解有机物的方法,比较了各种方法的优缺点及适用情况。利用方法四对印染废水起始惰性溶解有机物的含量进行了测定,结果表明该种废水单纯应用生物法处理难以满足排放标准的要求,必须辅以物化处理系统。起始惰性溶解有机物的测定是应用活性污泥数学模型模拟废水生物处理过程的基础。Four methods are presented to measure the soluble inert organic matter in the influent wastewater; meanwhile according to the advantages and disadvantages of each method, one method is used to determine the soluble inert organic matter in dyeing wastewater. The results indicate that dyeing wastewater treatment only with biological systems is difficult to reach the effluent limitation criteria and physical systems must be applied. Measuring the soluble inert organic matter in the influent wastewater is the base of simulation of wastewater treatment process by active sludge model.

关 键 词：印染废水 起始惰性溶解有机物 排放标准 溶解有机物 测定 惰性 起始 生物法处理 利用方法 处理系统 

分 类 号：X791.03[环境科学与工程—环境工程] TQ085.4[化学工程]