检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
机构地区:[1]清华大学机械工程系,北京100084 [2]北京航空制造工程研究所,北京100024
出 处:《电焊机》2005年第9期27-29,共3页Electric Welding Machine
基 金:国家自然科学基金项目(50375080)
摘 要:利用电弧的动态变阻性负载特性激发出电弧超声并应用于Ti6Al4V的TIG焊过程。研究了电弧超声对Ti6Al4V焊接接头组织和性能的影响,并与传统TIG焊进行了比较。结果表明,严格按照航空标准进行Ti6Al4V常规TIG焊与电弧超声TIG焊所获得的接头均达到航空一级。加入电弧超声后,随着超声频率的增加和激励电流的增大,焊接接头宽度逐渐减小,焊缝组织细化、等轴化,枝晶破坏痕迹不明显,接头拉伸强度、屈服强度、延伸率和疲劳强度均有所提高。A new method to excite ultrasonic by modulating are was described and applied in the TIG welding proeess of Ti6Al4V alloy.The effects of are-excited ultrasonic on microstructures and properties of the joint were compared with conventional TIG process. ith the increase of frequency and exciting current of additional ultrasonic,the width of the joints decreases,the grain is refined and equiaxed,and the tensile strength,the yield strength,the specific elongation and the fatigue strength are improved at the same time.
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.28