软接触电磁连铸过程中结晶器及初生坯壳的传热  

Heat Transfer of Mold and Initial Solidification Shell during Soft Contact Continuous Casting

作　　者：那贤昭[1] 王锡钢[2] 张兴中[1] 干勇[1] 

机构地区：[1]钢铁研究总院连铸技术国家工程研究中心,北京100081 [2]鞍山科技大学计算机学院,辽宁鞍山114000

出　　处：《钢铁研究学报》2005年第5期31-34,47,共5页Journal of Iron and Steel Research

基　　金：国家自然科学基金资助项目(59734080)

摘　　要：为了解高频磁场对软接触电磁连铸结晶器及初生坯壳传热行为的影响,用有限元二维数值模拟方法计算了软接触连铸过程中结晶器及初生坯壳的传热。得知在高频磁场(f=20 kHz)作用下,电磁场的感应加热会减少连铸初生坯壳的厚度、提高连铸坯的表面温度,并大幅度提高分瓣结晶器铜壁的温度。Heat transfer of soft contact continuous casting mold and strand in high frequency electromagnetic field were analyzed through 2-D FEM numerical simulation method. The change of thickness of initial solidification shell, temperature of strand, and temperature distribution of slit copper mold were obtained. Owing to the induction heating of high frequency electromagnetic field （f= 20 kHz）, the thickness of initial solidification shell decreases, and the temperature of strand surface and slit copper mold increases.

关 键 词：软接触 电磁连铸 结晶器 传热 有限元法 数值模拟 

分 类 号：TF777[冶金工程—钢铁冶金]